6-Channel 2.4GHz FHSS-3 Receiver for Park Flyers
This is an Airtronics RX-61H 6-Channel 2.4GHz FHSS-3 Receiver for Park Flyers. The RX-61H is an extremely small, lightweight, mid-range receiver designed for park flyer use. It is designed for use with Airtronics FHSS-3 compatible aircraft transmitters. It uses the same technology as the industry-leading Airtronics 92104 10-Channel 2.4GHz FHSS-3 receiver, just in a smaller package. This receiver takes advantage of the Airtronics Safety Link feature, adjustable Receiver Battery Voltage Fail Safe and the extremely high frame rate that makes you feel more connected to your model than ever!
In standard Airtronics fashion, this receiver features a push-button binding procedure, a single antenna for easy installation, and it's all packed in a small, lightweight setup.
*All Airtronics 2.4GHz FHSS-3 aircraft receivers now have a Nominal Input Voltage Rating of 4.8v ~ 7.4v.
Features and Specifications:
• One-Touch Binding
• Single Antenna
• High Frame Rate, Low Latency FHSS-3 Technology
• Nominal Input Voltage Up to 7.4v Allows Use of High Voltage Servos
• Frequency/Modulation Type: 2.4GHz/FHSS-3**
• Nominal Input Voltage: 4.8v ~ 7.4v
• In-Air Range: ~ 1200 Feet***
• Weight: 0.16oz (4.6g) with Case / 0.13 oz (3.8g) without Case
• Dimensions: 1.58 x 0.72 x 0.4in (40.2 x 18.4 x 10.4mm)
• Fail Safe Support: Yes (All Channels Programmable)
• Receiver Battery Voltage Fail Safe: Yes (3.8v ~ 4.6v Adjustable)
*This receiver has a Nominal Input Voltage rating of 4.8v ~ 7.4v, therefore, it can be powered using a 4 Cell to 6 Cell Ni-Cd or Ni-MH battery pack, or a 2S Li-Po or 2S A123/Li-Fe battery pack. DO NOT USE A 3S Li-Po BATTERY PACK! When using a 2S Li-Po battery pack you should NOT use servos rated for 4.8 or 6.0 volts, otherwise damage to your servos could occur. In this case, use high voltage 7.4 volt servos.
**Due to the extremely high frame rate that this receiver operates at, Digital servos should be used. In some cases Analog servos may not work with this receiver.
***This receiver is designed for park flyers. It is not a full-range receiver, so it should not be used on any aircraft other than park flyers. The receiver's range is approximately 1200 feet in-air.
Can't see this video? Click here.